Vol. 38 No. 6(2)
Special Issue on AI-driven Sustainable Sensor Materials, Processes, and Circular Economy Applications
Guest Editor: Shih-Chen Shi (National Cheng Kung University) and Tao-Hsing Chen (National Kaohsiung University of Science and Technology)
Hydrogen energy is recognized as a clean and sustainable alternative to fossil fuels, but its large-scale production remains limited by the cost and stability of electrocatalysts. In this study, ... Read More
In this study, tin oxide (SnO2) thin films were deposited on glass substrates by RF magnetron sputtering, with process parameters optimized by adjusting the oxygen flow rate. Subsequently, therma ... Read More
SnO2/metal/ZnO multilayer transparent conductive films incorporating Ag, Al, and Mo interlayers were fabricated by RF and DC magnetron sputtering to investigate the effects of interlayer metal se ... Read More
N-type Bi₂Te₃₋ₓSeₓ (x = 0.3, 0.6, 0.7) thermoelectric materials and ball-milled N-type Bi₂Te₂.₃Se₀.₇ were prepared to investigate their thermoelectric properties. The effects ... Read More
In this study, we developed multi-filler poly(methyl methacrylate) (PMMA) composites with enhanced UV shielding and low microwave loss. Integrating SiO2, cellulose nanocrystals (CNCs), and bromin ... Read More
The electrical steel used in motor cores frequently experiences magnetic property degradation owing to elastic deformation and residual stress introduced during manufacturing processes. The quant ... Read More
Welding is a crucial process in manufacturing, but traditional inspection methods are slow, prone to errors, and labor-intensive. Automated detection using artificial intelligence offers a sustai ... Read More
In intelligent manufacturing environments, the real-time awareness of material properties during heat treatment is essential for ensuring both product reliability and process stability. However, ... Read More
The grinding wheel condition critically affects surface integrity and process stability in precision grinding. During continuous grinding, abrasive grains exhibit multiple coexisting physical phe ... Read More
We present a stress-based indicator for predicting and evaluating the springback behavior of 7075 high-strength aluminum alloy during warm (150 and 250 °C) and hot (490 °C) forming through expe ... Read More
Laser sintering has emerged as an effective technique for fabricating ceramic coatings with localized energy input and rapid processing capability. In this study, Al2O3, 8 mol% yttria-stabilized ... Read More
The carbon felt electrode contacts the graphite bipolar plate through assembly pressure. The assembly pressure affects the battery’s internal resistance. An electrically conductive adhesive (EC ... Read More
S&M4483Research paper |
|
|
|
S&M4483 Ni–Fe Layered Double Hydroxide @ Nickel Foam Electrode with Electrochemical Impedance Spectroscopy-based Performance Monitoring for Efficient Water Splitting Hao-Ming Deng, Guan-Yu Chen, and Shih-Chen Shi pp. 3007-3014 https://doi.org/10.18494/SAM5964 Published on June 12, 2026 PDF (open access) |
S&M4484Research paper |
|
|
|
S&M4484 Effects of Oxygen Flow Rate on Optoelectronic Characteristics of SnO2 Thin Films for Application to Optical Sensors Chi-Fan Liu, Yun Ho, and Tao-Hsing Chen pp. 3015-3022 https://doi.org/10.18494/SAM6229 Published on June 12, 2026 PDF (open access) |
S&M4485Research paper |
|
|
|
S&M4485 Effects of Al, Mo, and Ag Interlayers on the Optoelectronic Properties of SnO2/Metal/ZnO Multilayer Transparent Conductive Films Yun Ho and Tao-Hsing Chen pp. 3023-3032 https://doi.org/10.18494/SAM6312 Published on June 12, 2026 PDF (open access) |
S&M4486Research paper |
|
|
|
S&M4486 Thermoelectric Properties of N-type Low-temperature Thermoelectric Materials and Applications for Thermoelectric Sensors Wen-Nan Wang, Pei-Yu Wang, and Tao-Hsing Chen pp. 3033-3040 https://doi.org/10.18494/SAM5987 Published on June 12, 2026 PDF (open access) |
S&M4487Research paper |
|
|
|
S&M4487 Bio-based Multi-filler Poly(methyl methacrylate) Composites for Sustainable UV-protective and Low-loss Microwave Sensor Applications Dieter Rahmadiawan, Shih-Chen Shi, and Du-Yi Wang pp. 3041-3050 https://doi.org/10.18494/SAM6309 Published on June 12, 2026 PDF (open access) |
S&M4488Research paper |
|
|
|
S&M4488 Plane-stress Needle-probe Measurement System for Characterizing the Inverse Magnetostrictive Behavior of Electrical Steel Under Tensile and Compressive Deformations Guan-Ming Chen, Wei-Hao Chang, Kai-Fan Lo, and Shih-Kang Kuo pp. 3051-3068 https://doi.org/10.18494/SAM6297 Published on June 12, 2026 PDF (open access) |
S&M4489Research paper |
|
|
|
S&M4489 AI-enabled Welding Defect Detection and Resistivity Validation for Sustainable Manufacturing Alvin Anderson, Guan-Yu Chen, and Shih-Chen Shi pp. 3069-3076 https://doi.org/10.18494/SAM5977 Published on June 12, 2026 PDF (open access) |
S&M4490Research paper |
|
|
|
S&M4490 Development of Data-driven Virtual Sensor Framework for Real-time Property Prediction in Intelligent Heat Treatment Systems Te-Kang Tsao pp. 3077-3088 https://doi.org/10.18494/SAM6285 Published on June 12, 2026 PDF (open access) |
S&M4491Research paper |
|
|
|
S&M4491 Intelligent Determination of Optimal Grinding Wheel Dressing Timing Based on Acoustic Emission Signals Yin-Wei Chao, Chun-Yen Chen, Yue-Feng Lin, Ming-Yi Tsai, and Kai-Jung Chen pp. 3089-3124 https://doi.org/10.18494/SAM6311 Published on June 12, 2026 PDF (open access) |
S&M4492Research paper |
|
|
|
S&M4492 Predicting Springback via a Stress-based Indicator Cheng-Kai ChiuHuang and Tsung-Cho Wu pp. 3125-3132 https://doi.org/10.18494/SAM6225 Published on June 12, 2026 PDF (open access) |
S&M4493Research paper |
|
|
|
S&M4493 Laser Sintering of Ceramic Coatings on 304 Stainless Steel: Effects of Energy Input on Microstructure, Hardness, and Wear Shih-Chen Shi, Po-Chun Wang, and Guan-Yu Chen pp. 3133-3142 https://doi.org/10.18494/SAM6173 Published on June 12, 2026 PDF (open access) |
S&M4494Research paper |
|
|
|
S&M4494 Optimization of Conductive Coatings for Graphite–Carbon Felt Composites in Flow Batteries Cheng-Hsien Kuo, Shang-Ching Chuang, and Hung-Yu Chen pp. 3143-3156 https://doi.org/10.18494/SAM6306 Published on June 12, 2026 PDF (open access) |
Cover of this Issue |
 |