Vol. 31 No. 2(2)
Special Issue on Selected Papers from ICASI2018 (2)
Guest Editor: Teen-Hang Meen (National Formosa University), Shoou-Jinn Chang National Cheng Kung University), and Stephen D. Prior (University of Southampton)
Thermal error plays a deterministic role in the machining precision of computer-numerical-control (CNC) tool machinery. Previously, three ways had been proposed to overcome thermal error problem ... Read More
In this paper, we propose a process inspection framework for metal additive manufacturing (AM) processes. AM, also known as 3D printing, is the process of joining materials to make objects on th ... Read More
Functional coatings are effective for improving the properties of devices. The development of thin-film-based surface acoustic wave (SAW) devices coated with piezoelectric zinc oxide (ZnO) thin ... Read More
Shear horizontal (SH) surface acoustic wave (SAW) sensors formed by combining (100) AlN films with a diamond substrate have been developed in this research. The propagation characteristics of SA ... Read More
The real-time polymerase chain reaction (RT-PCR) test chip employed in previous experiments used a matte black printed circuit board (PCB) substrate printed with a white silk legend on a heating ... Read More
In this study, Eu3+-doped ZnO nanowires were prepared with different concentrations of Eu3+ ions by a hydrothermal method. Before the Eu3+-doped ZnO nanowires were grown, sputtering was used to ... Read More
In this study, we analyzed the growth and annealing parameters of TiO2 nanotube (TNT) arrays and their effect on C14H14N3NaO3S methyl orange degradation. At first, the TNT arrays were grown on T ... Read More
The developments of biodegradable materials for orthopaedic implants has been progressing rapidly for decades. Biodegradable implants can eliminate the need for a second surgery and avoid the po ... Read More
An experimental sensing system and performance analysis of the measurement of the high-cycle fatigue properties of automobile structural steel are presented. Firstly, the yield strength and tens ... Read More
The microstructure of tungsten-inert-gas (TIG)-welded TC4 titanium alloy joints was analyzed. The stress-corrosion behavior and hydrogen embrittlement susceptibility of the welded joints were al ... Read More
In this study, we investigated the effect of the annealing time of copper oxide (CuO) on the morphological and chemical characteristics of films and the electrical properties of bottom-gate/top-c ... Read More
A three-dimensional (3-D) inverted-L multi-input multi-output (MIMO) magnetoelectric dipole antenna comprising two coupled monopole feed antennas is developed for energy-harvesting applications. ... Read More
In this paper, the computational results of numerical simulations for newly proposed structures combining two quarter-wavelength (QW) slabs in one dimension are presented. The new QW plate is co ... Read More
High-velocity flame thermal spraying technology is widely used to apply coatings on industrial and aerospace parts, because a high flame speed yields coatings with high bonding force, high densit ... Read More
The objective of this study is to apply a global navigation satellite system (GNSS)–real-time kinematic (RTK) positioning system, StarGazer, a visual sensor, and a range sensor to a wheeled mob ... Read More
With the widespread development of the Internet, the Internet of Things (IoT) technology has been popularly applied to many applications, for example, network appliances, automation and control, ... Read More
With the development of cities, the rapid growth of vehicle ownership has given rise to traffic violations and traffic safety problems resulting in casualties. Therefore, with the rise of intell ... Read More
We present an accident prediction model using environmental sensors for industrial Internet of Things (IIoT), with the aim of preventing various accidents that occur at construction sites. The m ... Read More
S&M1780Research Paper of Special Issue |
|
|
|
S&M1780 Sensing and Compensating the Thermal Deformation of a Computer-numerical-control Grinding Machine Using a Hybrid Deep-learning Neural Network Scheme Kun-Chieh Wang, Hui-Cun Shen, Chi-Hsin Yang, and Hong-Yi Chen pp. 399-409 https://doi.org/10.18494/SAM.2019.2104 Published on February 18, 2019 PDF (open access) |
S&M1781Research Paper of Special Issue |
|
|
|
S&M1781 A Framework for Process Inspection of Metal Additive Manufacturing Chih-Kun Cheng, Frank Liou, Yi-Chien Cheng, and Sheng-Chih Shen pp. 411-420 https://doi.org/10.18494/SAM.2019.2106 Published on February 18, 2019 PDF (open access) |
S&M1782Research Paper of Special Issue |
|
|
|
S&M1782 High-electromechanical-coupling-coefficient and High-velocity Surface Acoustic Wave Materials of ZnO Films on Diamond Jsung-Ta Tasi and Sean Wu pp. 421-428 https://doi.org/10.18494/SAM.2019.2110 Published on February 18, 2019 PDF (open access) |
S&M1783Research Paper of Special Issue |
|
|
|
S&M1783 High-shear-velocity Composite Acoustic Materials of AlN/Diamond for Biological MEMS Devices Hsi-Shan Huang and Sean Wu pp. 429-435 https://doi.org/10.18494/SAM.2019.2111 Published on February 18, 2019 PDF (open access) |
S&M1784Research Paper of Special Issue |
|
|
|
S&M1784 Study of Optimal Real-time Polymerase Chain Reaction Chip by Comparison of Coating Reflective Materials Ji-Soo Hwang, Bo-Jun Kim, Jong-Dae Kim, Yu-Seop Kim, Hye-Jeong Song, and Chan-Young Park pp. 437-445 https://doi.org/10.18494/SAM.2019.2101 Published on February 18, 2019 PDF (open access) |
S&M1785Research Paper of Special Issue |
|
|
|
S&M1785 Effect of the Concentration of Eu3+ Ions on Crystalline and Optical Properties of ZnO Nanowires Wen-Jie Zheng, Wen-Cheng Tzou, Jei-Ru Shen, Cheng-Fu Yang, Chih-Cheng Chen pp. 447-455 https://doi.org/10.18494/SAM.2019.2102 Published on February 18, 2019 PDF (open access) |
S&M1786Research Paper of Special Issue |
|
|
|
S&M1786 Analyses of Growth Parameters of TiO2 Nanotube Arrays and Their Effect on C14H14N3NaO3S Methyl Orange Degradation Shang-Te Tsai, Chi-Yu Lin, Yu-Xiang Dong, Cheng-Fu Yang, and Hong-Yu Shih pp. 457-467 https://doi.org/10.18494/SAM.2019.2103 Published on February 18, 2019 PDF (open access) |
S&M1787Research Paper of Special Issue |
|
|
|
S&M1787 Microstructure and Wear Property of As-cast Mg-2wt.%-Sn Alloys after Different Heat Treatment Processes Jung-Hsuan Chen, Yi-Fung Wang, Chuen-Guang Chao, and Tzeng-Feng Liu pp. 469-477 https://doi.org/10.18494/SAM.2019.2108 Published on February 18, 2019 PDF (open access) |
S&M1788Research Paper of Special Issue |
|
|
|
S&M1788 Experimental Investigation of High-cycle Fatigue Behavior for Automobile Structural Steel Based on Stress-Number-of-cycles Curves Tianjun Zhu, Hongyan Zheng, and Ruoyu Zhao pp. 479-490 https://doi.org/10.18494/SAM.2019.2135 Published on February 18, 2019 PDF (open access) |
S&M1789Research Paper of Special Issue |
|
|
|
S&M1789 Stress-corrosion Cracking Susceptibility of Tungsten-inert-gas-welded TC4 Titanium Alloy Joints under Low Strain Rates Yuwei Sun, Tao Feng, Yinzhen Wang, Qinglin Yang, And Zhen Jiao pp. 491-499 https://doi.org/10.18494/SAM.2019.2157 Published on February 18, 2019 PDF (open access) |
S&M1790Research Paper of Special Issue |
|
|
|
S&M1790 Structural and Electrical Characteristics of Solution-processed Copper Oxide Films for Application in Thin-film Transistors Heonju Lee, Xue Zhang, Eui-Jik Kim, and Jaehoon Park pp. 501-507 https://doi.org/10.18494/SAM.2019.2160 Published on February 18, 2019 PDF (open access) |
S&M1791Research Paper of Special Issue |
|
|
|
S&M1791 Multi-input Multi-output Magnetoelectric Dipole Antennas Comprising Dual Monopole Feed Antennas for Energy Harvesting Wen-Shan Chen, Chien-Min Cheng, and Guang-Ren Zhang pp. 509-518 https://doi.org/10.18494/SAM.2019.2107 Published on February 18, 2019 PDF (open access) |
S&M1792Research Paper of Special Issue |
|
|
|
S&M1792 Slice and Rearrange to Form Quarter-wavelength Plates: Numerical Simulation in One Dimension Chi-Chang Chang, Shin-Ku Lee, Mingtsu Ho, and Chenyu Chen pp. 519-529 https://doi.org/10.18494/SAM.2019.2109 Published on February 18, 2019 PDF (open access) |
S&M1793Research Paper of Special Issue |
|
|
|
S&M1793 Mechanical Properties of Cobalt-based Alloy Coating Applied Using High-velocity Oxygen Gas and Liquid Fuel Spraying Processes Cheng-Fu Yang, Wei-Lung Pai, Chao-Ming Hsu, and Cheng-Yi Chen pp. 531-542 https://doi.org/10.18494/SAM.2019.2166 Published on February 18, 2019 PDF (open access) |
S&M1794Research Paper of Special Issue |
|
|
|
S&M1794 Application of Real-time Positioning System with Visual and Range Sensors to Security Robot Chien-Lin Chen, Peng-Bo Wang, and Jih-Gau Juang pp. 543-558 https://doi.org/10.18494/SAM.2019.2105 Published on February 18, 2019 PDF (open access) |
S&M1795Research Paper of Special Issue |
|
|
|
S&M1795 Implementation of Fuzzy Localization System Based on Radio-frequency Identification Technology for Elderly People Chuan-Bi Lin, Yung-Fa Huang, Long-Xin Chen, and Jian-Ming Hong pp. 559-567 https://doi.org/10.18494/SAM.2019.2132 Published on February 18, 2019 PDF (open access) |
S&M1796Research Paper of Special Issue |
|
|
|
S&M1796 Fine-grained Vehicle Classification Technology Based on Fusion of Multi-convolutional Neural Networks Wei Zhu, Shaoyong Yu, Xiaodong Zheng, and Yun Wu pp. 569-578 https://doi.org/10.18494/SAM.2019.2133 Published on February 18, 2019 PDF (open access) |
S&M1797Research Paper of Special Issue |
|
|
|
S&M1797 Accident Prediction Model Using Environmental Sensors for Industrial Internet of Things Jung-Hyok Kwon and Eui-Jik Kim pp. 579-586 https://doi.org/10.18494/SAM.2019.2162 Published on February 18, 2019 PDF (open access) |
Cover of this Issue |
 |