Vol. 31 No. 2(3)
Regular Issue
We demonstrated a metal-mesh electrode based touch screen panel that does not have back surface touch error (BTE) due to panel bending. It was fabricated with a 7-inch double layer structure usin ... Read More
In this paper, we demonstrate the novel fabrication processes of a dual Si atomic force microscopy (AFM) probe with embedded microchannels and a nozzle hole for liquid delivery function. The emb ... Read More
As the amount of urea removed from the blood (MB) is equal to that transferred into the spent dialysate during dialysis treatment, MB can be estimated from the urea concentration in the spent dia ... Read More
We developed a new blood-leakage sensor for hemodialysis therapy. In this sensor, medical gauze is arranged on medical adhesive tape, which contains detection electrodes formed by screen-offset ... Read More
In this work, we developed a smart wearable device for gait speed measurement with dual wireless communication on the feet by using an inertia measurement unit (IMU) sensor. To discover step cou ... Read More
In this study, inverse opal photonic crystals (IOPCs) with mesopores (diameter, 2–50 nm) were fabricated by the optimization of the size ratio of large to small polystyrene (PS) nanoparticles u ... Read More
Brucella bacteria are widely distributed throughout the world causing huge losses in agriculture and threatening human health through zoonotic infection. In this article, a label-free amperometr ... Read More
S&M1798Research Paper |
|
|
|
S&M1798 Design of Metal-mesh Electrode-based Touch Panel for Preventing Back-surface Touch Error Kyoung Soo Chae, Yun Ki Hong, Hyun Jun Kim, Jae Youn Jeong, and Tae Hee Han pp. 587-593 https://doi.org/10.18494/SAM.2019.2003 Published on February 28, 2019 PDF (open access) |
S&M1799Research Paper |
|
|
|
S&M1799 Fabrication Process of Embedded Silicon Microchannel and Nozzle Structure for Liquid-delivering Atomic Force Microscopy Probe Jinseo Hong, Yusuke Masuda, Yoshitaka Miura, Takayuki Shibata, and Takashi Mineta pp. 595-605 https://doi.org/10.18494/SAM.2019.2018 Published on February 28, 2019 PDF (open access) |
S&M1800Research Paper |
|
|
|
S&M1800 Compact Urea Sensor System Based on Chemiluminescence for Dialysis Machine Kunihito Hayashi, Jun’ya Hori, Masahiro Ozaki, Masuo Nakagawa, and Masafumi Hashiguchi pp. 607-618 https://doi.org/10.18494/SAM.2019.2026 Published on February 28, 2019 PDF (open access) |
S&M1801Research Paper |
|
|
|
S&M1801 Adhesive-bandage-type Blood-leakage Sensor Fabricated by Screen-offset Printing Ken-ichi Nomura, Yoshinori Horii, and Hirobumi Ushijima pp. 619-627 https://doi.org/10.18494/SAM.2019.2141 Published on February 28, 2019 PDF (open access) |
S&M1802Research Paper |
|
|
|
S&M1802 Wearable Sensor for Measurement of Gait Walking and Running Motion Yi-Cheng Huang, Yu-Rui Chen, Hung-Yi Wu, and Yu-Jui Huang pp. 629-644 https://doi.org/10.18494/SAM.2019.2167 Published on February 28, 2019 PDF (open access) |
S&M1803Research Paper |
|
|
|
S&M1803 Fabrication of Inverse Opal Photonic Crystals with Mesopores Using Binary Colloidal Co-assembly Method for Signal Enhancement in Formaldehyde Detection Yuto Komori, Hiroaki Murakami, Taiki Kimura, and Takeshi Onodera pp. 645-659 https://doi.org/10.18494/SAM.2019.2168 Published on February 28, 2019 PDF (open access) |
S&M1804Research Paper |
|
|
|
S&M1804 Label-free Amperometric Immunosensor for Quantitative Detection of Low-concentration Brucellapositive Standard Serum Wei Yang, Zhiyong Zhang, Haiyan Song, Xiaoping Han, and Yueming Zuo pp. 661-671 https://doi.org/10.18494/SAM.2019.2180 Published on February 28, 2019 PDF (open access) |
Cover of this Issue |
 |