Vol. 36 No. 4(4)
Special Issue on Innovations of Sensor Applications and Related Technologies in IoT Part 3-2
Guest Editor: Teen-Hang Meen (National Formosa University), Wenbing Zhao (Cleveland State University), and Cheng-Fu Yang (National University of Kaohsiung)
Public audits in universities have exposed fraudulent practices in scientific research expenditure, posing a significant obstacle to progress. To address this issue, it is imperative to conduct r ... Read More
In response to the developing trend of technology and the increasing number of difficult-to-machine materials, the geometric angle of the cutting tool is worthy of further study. In metal cutting ... Read More
In road traffic management, high-speed vehicle detection is often affected by factors such as vehicle speed, weather, camera angle, and image resolution, making vehicle detection on express roads ... Read More
Accurate and easy-to-use nondestructive tests (NDTs) are strongly required to detect damage and defects in concrete structures. In the Sonic-IR method, the IR radiation due to ultrasonic vibratio ... Read More
A sample with the spin Hall effect causes spin-orbit coupling to induce spin-polarized electrons that accumulate inverse signals on either side of the sample. In this study, a multiterminal devic ... Read More
When treating a vasospasm brought on by a malfunctioning coronary artery system (CAS), the goal is to enhance the physiology of the CAS by synchronizing its dynamic behavior with that of a health ... Read More
We explored the uniformity of light mixing, optical component design, and the directional orientation of the LED projection angles in a new LED lighting system design. To validate the design, we ... Read More
Improving the reliability of the transmission gear module in the gearbox of a nuclear power plant is of considerable and far-reaching significance to ensure energy security. As a key transmission ... Read More
In this study, we investigated the displacement behavior of SUS316L stainless steel under five consecutive direct energy depositions through experiments and the use of the ANSYS commercial finite ... Read More
In this study, we addressed the problem of maximum output power in wave energy devices by analyzing the forces acting on the buoy and oscillators under the influence of ocean waves. The motion mo ... Read More
S&M3619Research Paper of Special Issue |
|
|
|
S&M3619 Optimization of University Scientific Research Performance Evaluation Management Based on Back-Propagation Artificial Neural Network Wanzhi Ma and Na Chu pp. 1575-1590 https://doi.org/10.18494/SAM4712 Published on April 30, 2024 PDF (open access) |
S&M3620Research Paper of Special Issue |
|
|
|
S&M3620 Geometric-angle Optimization of Milling Cutter for Processing Stainless Steel by the Finite Element Method I-Chiang Yang, Hung-Hsiang Huang, Liang-Yu Lu, Lian-Wang Lee, Kuan-Yeh Huang, Te-Jen Su, and Chien-Yu Lu pp. 1591-1604 https://doi.org/10.18494/SAM4715 Published on April 30, 2024 PDF (open access) |
S&M3621Research Paper of Special Issue |
|
|
|
S&M3621 Vehicle Detection on Express Roads Using YOLOv7 with Taguchi Parameter Optimization Method Mei-Kuei Chen, Chun-Lung Chang, Cheng-Jian Lin, and Wen-Jong Chen pp. 1605-1625 https://doi.org/10.18494/SAM4718 Published on April 30, 2024 PDF (open access) |
S&M3622Research Paper of Special Issue |
|
|
|
S&M3622 Damage and Defect Identification in Cementitious Materials with Heat Generation by Applying Sonic-IR Method Katsufumi Hashimoto, Nao Takahashi, and Shunsuke Kumagai pp. 1627-1635 https://doi.org/10.18494/SAM4720 Published on April 30, 2024 PDF (open access) |
S&M3623Research Paper of Special Issue |
|
|
|
S&M3623 Detecting Spin Hall Signals of Permalloys and Heavy Metals through the Inverse Spin Hall Effect Kao-Fan Lai, Chun-Chia Chang, Ning Fang Liang, Deng-Shiang Shiu, and Lance Horng pp. 1637-1644 https://doi.org/10.18494/SAM4725 Published on April 30, 2024 PDF (open access) |
S&M3624Research Paper of Special Issue |
|
|
|
S&M3624 Almost Finite-time Synchronization of Coronary Artery Systems via Adaptive Fractional-powered-integral-type Sliding Mode Control Method Hao Hong, Linuo Lai, Chi-Hsin Yang, and Kun-Chieh Wang pp. 1645-1659 https://doi.org/10.18494/SAM4727 Published on April 30, 2024 PDF (open access) |
S&M3625Research Paper of Special Issue |
|
|
|
S&M3625 Design of LED Lighting System with Improved Color Mixing Uniformity Chih-Ching Hung, Hsin-Hung Lin, and Ching-Hui Chen pp. 1661-1674 https://doi.org/10.18494/SAM4730 Published on April 30, 2024 PDF (open access) |
S&M3626Research Paper of Special Issue |
|
|
|
S&M3626 Online Monitoring and Prediction Methodology of Lubricating Oil State in Gearbox of a Nuclear Power Plant Based on Measurement with Sensors Long Wu, Kun-Chieh Wang, Gau Hau, Qiang Lei, and Chi-Hsin Yang pp. 1675-1691 https://doi.org/10.18494/SAM4733 Published on April 30, 2024 PDF (open access) |
S&M3627Research Paper of Special Issue |
|
|
|
S&M3627 Employment of Finite Element Analysis Method to Analyze the Thermal Effects of Direct Energy Deposition on SUS316L Wenjie Zheng, Hung-Yu Chang, Chao-Ming Hsu, and Cheng-Fu Yang pp. 1693-1706 https://doi.org/10.18494/SAM4892 Published on April 30, 2024 PDF (open access) |
S&M3628Research Paper of Special Issue |
|
|
|
S&M3628 Design of a Wave Electric Power Generation System with Maximum Output Power Chen-Ming Zhang, Shou-Hua Gong, Jin-Xing Zhang, Yu-Ping Chen, and Cheng-Fu Yang pp. 1707-1730 https://doi.org/10.18494/SAM5019 Published on April 30, 2024 PDF (open access) |
Cover of this Issue |
 |