Vol. 36 No. 9(2)
Special Issue on Advanced Sensors Material and Processes
Guest Editor: Shih-Chen Shi (National Cheng Kung University) and Tao-Hsing Chen (National Kaohsiung University of Science and Technology)
Evaluating the integrity of liquefied natural gas (LNG) storage tanks is essential for safety and environmental conservation. In this study, which centered on an LNG storage tank on a specific is ... Read More
A carbon monoxide sensor with composite detection capabilities for carbon monoxide, hydrogen sulfide, and nitric oxide gases was developed using gas concentration detection technology based on co ... Read More
Neural network algorithms are becoming more commonly used to model big data, such as images and speech. Although they often offer superior performance, they require more training time than tradit ... Read More
In this study, titanium metal (99.99%) was deposited on quartz glass substrate test specimens by DC magnetron sputtering. Thereafter, radio-frequency magnetron sputtering was used to create an ox ... Read More
Demand for optimized high-strength, low-alloy steel used in sensor applications and as load elements is rising. Achieving strength through grain refinement while preserving toughness is both prac ... Read More
The physical properties, the phase diagram for the Na2O–Al2O3–H2O system, and the crystal structure of sodium aluminate were studied. In laboratory-scale experimentally simulation tests, the ... Read More
In this study, we demonstrated that adding 0.05 wt.% cellulose nanofibers (CNFs) to CNF-poly(methyl methacrylate) (PMMA) composite materials enhanced hardness, toughness, and maximum flexural str ... Read More
A sequential technique that combines wire electrical discharge machining (wire-EDM) and abrasive grinding on dedicated equipment improves the edge quality of boron-doped polycrystalline diamond ( ... Read More
Because of changing consumer habits, manufacturing processes are shifting from mass production to small-batch production, which is making machining more complex and increasing demands for precisi ... Read More
The transition from solvent to low volatile organic compound and eco-friendly paint is a megatrend in the Asia Pacific region, and waterborne wood paint is still in the early stage of this transi ... Read More
S&M3761Research Paper of Special Issue |
|
|
|
S&M3761 Integration of Time-Series Interferometric Synthetic Aperture Radar Imagery and LiDAR Point Cloud for Monitoring and Analysis of Liquefied Natural Gas Storage Tank Exteriors Ming Guo, Yaxuan Wei, Zhaorui Chen, Youshan Zhao, Xingyu Tang, Kecai Guo, and Kun Tang pp. 3713-3730 https://doi.org/10.18494/SAM4702 Published on September 5, 2024 PDF (open access) |
S&M3762Research Paper of Special Issue |
|
|
|
S&M3762 Development of Carbon Monoxide Sensor Based on Composite Electrochemical Elements Qingchuan Zhao, Jun Li, and Shiling Sun pp. 3731-3742 https://doi.org/10.18494/SAM4783 Published on September 5, 2024 PDF (open access) |
S&M3763Research Paper of Special Issue |
|
|
|
S&M3763 Exploring Learning Strategies for Training Deep Neural Networks Using Multiple Graphics Processing Units Nien-Tsu Hu, Ching-Chien Huang, Chih-Chieh Mo, and Chien-Lin Huang pp. 3743-3755 https://doi.org/10.18494/SAM4853 Published on September 5, 2024 PDF (open access) |
S&M3764Research Paper of Special Issue |
|
|
|
S&M3764 Effect of Annealing Temperature on Photoelectric Properties of ITO:Ga/Ti Thin Films for Photosensor Applications Wen-Nan Wang, Tsai-Dan Chang, and Tao-Hsing Chen pp. 3757-3765 https://doi.org/10.18494/SAM5049 Published on September 5, 2024 PDF (open access) |
S&M3765Research Paper of Special Issue |
|
|
|
S&M3765 Optimizing Sensor-grade High-strength Low-alloy Steel: Effects of Cyclic Heat Treatment Shih-Chen Shi and Dun-Kai Ko pp. 3767-3778 https://doi.org/10.18494/SAM5058 Published on September 5, 2024 PDF (open access) |
S&M3766Research Paper of Special Issue |
|
|
|
S&M3766 Sodium Aluminate Study in Response to Process Excursion Wen-Cheng (Agingu) Shih pp. 3779-3786 https://doi.org/10.18494/SAM5072 Published on September 5, 2024 PDF (open access) |
S&M3767Research Paper of Special Issue |
|
|
|
S&M3767 Dissipation Energy as a Method for Sensing the Tribology Mechanism Shih-Chen Shi, Tao-Hsing Chen, Chih-Chia Wang, Hao-Fu Zhang, Yue-Feng Lin, and Dieter Rahmadiawan pp. 3787-3796 https://doi.org/10.18494/SAM5080 Published on September 5, 2024 PDF (open access) |
S&M3768Research Paper of Special Issue |
|
|
|
S&M3768 On-machine Fabrication of Boron-doped Polycrystalline Diamond Cutting Tools by Combining Wire Electrical Discharge Machining and Abrasive Grinding Yue-Feng Lin, Pei-Yu Lai, and Yuan-Xiu Luo pp. 3797-3815 https://doi.org/10.18494/SAM5097 Published on September 5, 2024 PDF (open access) |
S&M3769Technical Paper of Special Issue |
|
|
|
S&M3769 Servo Sensor Signal Utilization in Machine Tool Condition Monitoring and Fault Diagnosis Cheng-Kai Huang, Chun-Hao Chen, Kun-Ying Li, and Shih-Jie Wei pp. 3817-3841 https://doi.org/10.18494/SAM5175 Published on September 5, 2024 PDF (open access) |
S&M3770Research Paper of Special Issue |
|
|
|
S&M3770 System Solution for Waterborne Wood Paint Discoloration Wen-Cheng (Agingu) Shih pp. 3843-3849 https://doi.org/10.18494/SAM5230 Published on September 5, 2024 PDF (open access) |
Cover of this Issue |
 |