pp. 3121-3128
S&M1998 Review Paper of Special Issue https://doi.org/10.18494/SAM.2019.2399 Published: October 25, 2019 Sensing Technologies for Metal Forming [PDF] Ming Yang (Received April 10, 2019; Accepted June 13, 2019) Keywords: process monitoring, die-embedded sensors, soft sensing, intelligent process visualization
Studies on sensing technologies for metal forming are reviewed in this study. The sensing technologies are divided into four categories: direct and indirect metrologies with commercial sensors, the development of particular sensors or sensing systems, and intelligent metrologies associated with soft sensing. The state-of-the-art sensing technologies in each category are introduced with case studies.
Corresponding author: Ming YangThis work is licensed under a Creative Commons Attribution 4.0 International License. Cite this article Ming Yang, Sensing Technologies for Metal Forming, Sens. Mater., Vol. 31, No. 10, 2019, p. 3121-3128. |